Add FavoritesJoin UsBuy Now
中文版|ENGLISH
                                                                                                        
no more nails
home>>Product>New Products-no more nails



Available size: 300ml
Color: white



No need nails adhesive
No.No nails glue/SP-1016
Overview
Features
Technical data
Directions

 

This NO MORE MAILS is a synthetic rubber based multipurpose construction adhesive which exhibits excellent strength, flexibility, good temperature resistance and good slump resistance. It is formulated to bond a variety of common construction materials. It has strong initial grab, superior adhesion and will not slump on vertical surfaces.

 

Where to use

This is a with the benefit of faster application, forming STRONG and LASTING BONDS on most building substrates, including: TIMBER MDF PARTICLEBOARD PLASTER BOARD STYRENE FOAM MASONRY & CONTRETE TILES CERAMICS METALS PLASTICS RUBBER & GLASS SKIRTING CORNICES ARCHITRAVES

 

Not recommended for

Wet surface

Grease and dust surfac  

 

Feature

Parameter

Specific weight:

(1.60 +/- 0.05) g/cm3

Skin over time:

10-20 minutes

Volume variation:

(-12 +/- 2) %

E-module 100%:

(0.31 +/- 0.02) N / mm2

Joint movement capability in services:

6% of joint width

Service temperature:

- 25 C to + 80 C

 

 Name
Download
  MSDS
  
  
  
  
  


 

Safety precaution

Wash hands after use.

 

Preparation

Surfaces must be clean, dry and free of frost, grease, dust and other contaminants. To obtain maximum adhesion, surfaces should be flat to provide adequate contact. Painted surfaces must be well cured and free of loose paint. Sand glossy surfaces to a dull finish. Pre-fit all materials before applying adhesive. Cut the tip off the cartridge and screw the nozzle, then apply with silicone gun.

 

Application

Ensure surfaces are dry and free from oil, grease and dust.

Carefully pierce seal at end of metal tube with reverse end of cap, Attach nozzle to tube and cut to desired opening.

Apply bead along length of joist, stud or batten, on broad flat surfaces apply beads every 40cm.

Bring surfaces together as soon as possible(within the first 10mins)

Fix with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area.

After use, remove nozzle and replace cap.

Allow adhesive to set(min.24 hours) before removing any temporary fastenersor clamping. Use with mechanical fasteners in high stress applications.

 

Effect

Strong adhesive property to most material, after applying, it can bond the parts very strong, it is non-corrosion, and long life.

 


Related Products


No need nails adhesive
Related Links

Stay up to date with all the latest news and special offers from Splendor