Add FavoritesJoin UsBuy Now
中文版|ENGLISH
                                                                                                        
Winter pu foam- W series
home>>Product>pu foam-Winter pu foam- W series



Available size: 750ml, 500ml, 300ml
Color: cream yellow, white...



Winter pu foam
No.Winter pu foam/SP-7006
Overview
Features
Technical data
Directions

 

It is based on moisture curing polyurethane, is developed for cold area or for worldwide winter use with a lowest processing temperature-18 .It provides high expanding performance and excellent bonding strength, any lower temperature than this we strongly recommend to warm the can first till it meets out lowest temperature requirement .The foam is widely used for filling joints between walls, ceilings, floors and gaps around pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.

 

Where to use

Mounting of window and door frames

Sealing of all types of cracks and holes

Insulation of water-pipe network, central heating

Soundproofing of partition walls, car and boat cabins etc.

 

Product features

Winter foam- 18, Remarkable weather resistance, High bonding strength, Shelf life:18 months.  

 

Feature (As Supplied – tested at 23°C±2°C, RH50%±5%)

Parameter

Aspect 

Compressed Liquid

Consistency

Stable Foam

Totally Cured Time, H

24

Tack-Free Time , min

7~15

Drying Time, min

ca.30

Yield (expansion rate)

80~90

Service Temp, °C

-60 ~+100

Application Temp, °C 

-18~+35

 

Feature (As Cured– tested at 23°C±2°C, RH50%±5% 7 days)

Parameter

Cutting Time,min

15~35

Volume Shrinkage, %

≤3

Post Expansion

None

Cellular Structure

40~55% open cells

Gravity, kg/m³ 

18~25

Compressive Strength, kPa

≥150

Tensile Strength ,kPa

>30 (10%)

Adhesive Strength, kPa 

≥100

Fire Class (DIN 4102 )

B3

Insulation Factor, Mw/m.K

<35

Water Absorption (ML)

0.3~1(no epidermis)

<0.1(with epidermis)

 

 Name
Download
  MSDS
  
  
  
  
  


 

Safety precaution

Wash hands after use

 

Preparation

Substrate must be clean, firm, free of loose particles and free of dust, grease and mold release agents. Surfaces not to be foamed must be protected. Shake cans well before using.

 

Application

1. Shake can well to make the foam ready for use

2. Clean the substrate and spray some water on it

3. Screw foam dispenser on tightly and turn can upside down

4. Vertical fills the gaps from the bottom upwards

5. Foam is tack-free (dry to the touch) in 8 minutes in temperatures between +18 and +25 (65 ~77). Higher temperatures will result in faster curing times

6. Remove fresh foam over spray with SPLENDOR Foam Cleaner or solvents such as acetone. Cured foam can only be removed mechanically.

Remark: For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.

 

Important note

Contents are under pressure. Do not puncture or incinerate. Do not place in hot water or near radiators, stoves or other sources of heat.

Use only in well-ventilated areas. Wear impervious gloves, protective eyewear, and suitable work clothes when using. Read all instructions and safety information (MSDS) prior to use of any product. The product contains no formaldehyde. Cured foam is non-toxic.  


Related Products


Winter pu foam
Related Links

Stay up to date with all the latest news and special offers from Splendor