spray paint,silicone sealant,lubricant,pu foam

product list: pu foam; Premium quality PU foam- O series; High gade PU foam- M series; Medium high grade PU foam- R series; Medium grade PU foam- V series; Low grade PU foam- L series; Pu foam for wood door- D series; Winter pu foam- W series; Fire rated- b2 series; PU foam cleaner; Spray gun; Silicone Sealant; Spray Paint; Car Care Products; PU Sealant; New Products

home>>Product>pu foam-High gade PU foam- M series

Available size: 750ml, 500ml, 300ml
Color: cream yellow, white...

High grade pu foam
No.High grade pu foam/SP-65

Overview

Features

Technical data

Directions

M series pu foam is economical with high-dimensional stability and strong bonding or big bubble bolum, its initial bubble is very good and the last bubble is smaller. The cured foam is very good for low temperature resistance and seasonal applicability. The bubble formation is flexible with more pressure resistance.

Where to use

Mounting of window and door frames

Sealing of all types of cracks and holes

Insulation of water-pipe network, central heating

Soundproofing of partition walls, car and boat cabins etc.

Product features

Easy to use

Durable airtight seal-stops air infiltration, drafts and energy loss

Bonds to and seals most popular construction materials, wood, concrete, plaster, plumbing etc.

Economically insulates, fills, seals and bonds

Excellent for interior and exterior applications

High insulating value-saves energy and money

Feature	Parameter
Consistency：	Stable Foam
Curing System：	Moisture-cure
Tack-Free Time(min)：	7-15
Drying Time：	Dust-free after 20-25 min
Cutting Time(hour)：	1-2(+25°C)
Shrink：	None
Post Expanshion：	None
Cellular Structure：	60-65% open cell
Specific Gravity：	17-22
Temperature Resistance：	-35°C - +90°C
Application Temperature Range：	+5°C - +35°C
Color：	Champagne
Fire Class (DIN 4102)：	B2
Insulation Factor (Mw/m.k)：	<34
Compressive Strengh (kPa)：	>117
Tensile Strengh (kPa)：	>27 (10%)
Adhesive Strengh (kPa)：	>78
Water Absorption (ML)：	2-3 (no epidermis) <0.5(with epidermis)

Name

Download

MSDS
TDS

Safety precaution

Wash hands after use

Preparation

Substrate must be clean, firm, free of loose particles and free of dust, grease and mold release agents. Surfaces not to be foamed must be protected. Shake cans well before using.

Application

1. Shake can well to make the foam ready for use

2. Clean the substrate and spray some water on it

3. Screw foam dispenser on tightly and turn can upside down

4. Vertical fills the gaps from the bottom upwards

5. Foam is tack-free (dry to the touch) in 8 minutes in temperatures between +18℃ and +25℃ (65℉ ~77℉). Higher temperatures will result in faster curing times

6. Remove fresh foam over spray with SPLENDOR Foam Cleaner or solvents such as acetone. Cured foam can only be removed mechanically.

Remark: For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.

Important note

Contents are under pressure. Do not puncture or incinerate. Do not place in hot water or near radiators, stoves or other sources of heat.

Use only in well-ventilated areas. Wear impervious gloves, protective eyewear, and suitable work clothes when using. Read all instructions and safety information (MSDS) prior to use of any product. The product contains no formaldehyde. Cured foam is non-toxic.