spray paint,silicone sealant,lubricant,pu foam

product list: pu foam; Premium quality PU foam- O series; High gade PU foam- M series; Medium high grade PU foam- R series; Medium grade PU foam- V series; Low grade PU foam- L series; Pu foam for wood door- D series; Winter pu foam- W series; Fire rated- b2 series; PU foam cleaner; Spray gun; Silicone Sealant; Spray Paint; Car Care Products; PU Sealant; New Products

home>>Product>pu foam-Pu foam for wood door- D series

Available size: 750ml, 500ml, 300ml
Color: cream yellow, white...

pu foam for wood door
No.pu foam for wood door/SP-7008

Overview

Features

Technical data

Directions

It is based on moisture curing polyurethane, containing safety propellant, is a breakthrough for wood door installation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure. It is a one-component polyurethane foam used to install wooden doors, fill perfectly the gaps between wooden frames and walls. Its low expanding feature nicely avoids wood distortion, cost-efficient, durable, energy saving, insulated, heat preservation, weather resistance, and sound mitigation.

Where to use

Mounting of window and door frames

Sealing of all types of cracks and holes

Insulation of water-pipe network, central heating

Soundproofing of partition walls, car and boat cabins etc.

Product features

Wooden door installation, High bonding strength, Save labor cost, Shelf life: 12 months

Feature	Parameter
PU FOAM/base	Polyurethane
Consistency	Stable Foam
Cutting System	Moisture-cure
Tack-Free Time(min)	7~15
Drying Time	Dust-free after 20~25 min
Cutting Time(hour)	1~1.5(+25°C) 2~3(-25°C)
Yield(L)	30~35
Shrink	None
Post Expansion	None

Name

Download

MSDS

Safety precaution

Wash hands after use

Preparation

Substrate must be clean, firm, free of loose particles and free of dust, grease and mold release agents. Surfaces not to be foamed must be protected. Shake cans well before using.

Application

1. Shake can well to make the foam ready for use

2. Clean the substrate and spray some water on it

3. Screw foam dispenser on tightly and turn can upside down

4. Vertical fills the gaps from the bottom upwards

5. Foam is tack-free (dry to the touch) in 8 minutes in temperatures between +18℃ and +25℃ (65℉ ~77℉). Higher temperatures will result in faster curing times

6. Remove fresh foam over spray with SPLENDOR Foam Cleaner or solvents such as acetone. Cured foam can only be removed mechanically.

Remark: For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.

Important note

Contents are under pressure. Do not puncture or incinerate. Do not place in hot water or near radiators, stoves or other sources of heat.

Use only in well-ventilated areas. Wear impervious gloves, protective eyewear, and suitable work clothes when using. Read all instructions and safety information (MSDS) prior to use of any product. The product contains no formaldehyde. Cured foam is non-toxic.