spray paint,silicone sealant,lubricant,pu foam

product list: pu foam; Premium quality PU foam- O series; High gade PU foam- M series; Medium high grade PU foam- R series; Medium grade PU foam- V series; Low grade PU foam- L series; Pu foam for wood door- D series; Winter pu foam- W series; Fire rated- b2 series; PU foam cleaner; Spray gun; Silicone Sealant; Spray Paint; Car Care Products; PU Sealant; New Products

home>>Product>pu foam-PU foam cleaner

Available size: 750ml, 500ml, 300ml
Color: cream yellow, white...

Pu foam cleaner
No.Pu foam cleaner/SP-7015

Overview

Features

Technical data

Directions

It is used to clean the gun extrusion tube, adapter and other unwanted foam before cured. You might need this when using gun/ professional type PU foam (for straw/manual type PU foam, foam cleaner is not necessary). 2-year shelf life.

Where to use

Clean the pu foam where you don’t need the old foam anymore

Porduct features

Acetone based cleaner, aromatic odor, clean uncured PU foam only.

Feature	Parameter
Consistency	Stable Foam
Curing System	Moisture-cure
Tack-Free Time(min)	7-15
Drying Time	Dust-free after 20-25 min
Cutting Time(hour)	1-2(+25°C)
Yield (L)	40-45
Shrink	None
Post Expanshion	None
Cellular Structure	60-65% open cell
Specific Gravity	17-22
Temperature Resistance	-35°C - +90°C
Application Temperature Range	+5°C - +35°C
Color	Champagne
Fire Class (DIN 4102)	B2
Insulation Factor (Mw/m.k)	<34
Compressive Strengh (kPa)	>120
Tensile Strengh (kPa)	>30 (10%)
Adhesive Strengh (kPa)	>80
Water Absorption (ML)	2-3 (no epidermis)
Water Absorption (ML)	<0.5(with epidermis)

Name

Download

FOAM CLEANER MSDS

Safety precaution

Wash hands after use

Preparation

Keep old foam surface clean, free of loose particles and free of dust, grease and mold release agents. Shake cans well before using.

Application

1. Shake can well to make the foam ready for use

2. Screw foam dispenser on tightly and turn can upside down

3. Vertical spray the foam cleaner on the old foam surface from the bottom upwards

4. Wipe the remanet

Remark: For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.

Important note

Contents are under pressure. Do not puncture or incinerate. Do not place in hot water or near radiators, stoves or other sources of heat.

Use only in removing old foam. Wear impervious gloves, protective eyewear, and suitable work clothes when using. Read all instructions and safety information (MSDS) prior to use of any product. The product contains no formaldehyde. Cured foam is non-toxic.