spray paint,silicone sealant,lubricant,pu foam

product list: Spray Paint; normal color spray paint; metallic spray paint; super metallic spray paint; fluorescent spray paint; high-temp resistance spray paint; Bright chrome/gold spray paint; hammer finish; Marking spray paint; Graffiti art spray paint; rubber paint; paint remover; Silicone Sealant; pu foam; Car Care Products; PU Sealant; New Products

home>>Product>Spray Paint-high-temp resistance spray paint

Available size: 8 fl.0z, 10 fl.oz...
Available color: high temp black, high temp silver...

High-temp resistance spray paint
No.Hith temp resistance color/SP-3010

Overview

Features

Technical data

Directions

This product is silicone aerosol paint which can be natural dried under normal temperature. It has features of easy for operation, good atomizer and high rate when spraying. Its paint film can be dried in 30 minutes under normal temperature, It can still maintain its good performance even long time under temperature of 500℃. The silver color can reach a heat resistant of 500℃.

Where to use

Mainly used in chimney, engine and exhaust pipes of vehicles and motorcycles and other kinds of high temperature environments.

Information
This product has been classified in accordance with the hazard criteria of the Chinese Controlled Products Regulations (PRC) and the MSDS contains all of the information required by the PRC.

Feature	Parameter
Odor, Color, Grade:	corresponding color, little odor
General Physical Form:	Liquid
Autoignition temperature:	No Data Available
Flash Point:	Not Applicable
Boiling point:	1112 ºF
Density:	1 [Ref Std: WATER=1]
Vapor Density :	No Data Available
Vapor Pressure:	< 20 mmHg [Test Method: stimated
Specific Gravity:	1.01 [Ref Std: WATER=1
pH:	6 - 7 [Details: ndiluted
Melting point:	No Data Available
Solubility in Water:	Complete
Volatile Organic Compounds:	0 g/l
Percent volatile:	75 - 95 %
VOC Less H2O & Exempt Solvents:	0 g/l
Viscosity:	50 - 200 centipoise

Name

Download

MSDS
TDS

Adviced application environment

Well-ventilated area.

Preparation

It will be better to ensure the stuff surface is clean, dry and oilless before apply the spray paint, if not, it will have an influence on the final effect. And you'd better to apply the paint in a well-ventilated area and take gloves, glasses, respirator. Shaking the aerosol paint up and down several times softly to blend the paint well-proportioned, and take away the cap to apply.

Application

Aim the nozzle at the stuff which you want to change its color, keep 15cm dstance between the nozzle and the stuff and press the nozzle softly, meanwhile, move the can slowly to ensure the paint is sprayed well-distributed. After applying, don't touch the surface before it dry. If you are not satisfied with some segment, you can spray at that segment again like before. Then wait it dry.

Effect

The surface will brght-colored, touch well, look nice, it also can cover the old scratch make the surface look like new.