spray paint,silicone sealant,lubricant,pu foam

product list: Silicone Sealant; acetic silicone sealant; neutral silicone sealant; acrylic silicone sealant; structural silicone sealant; silicone gasket maker; super glue; no more nails; Spray Paint; pu foam; Car Care Products; PU Sealant; New Products

home>>Product>Silicone Sealant-silicone gasket maker

Available size: 3 fl.oz
Color: grey, red, blue, black, clear...

Gasket maker
No.Gasket maker/SP-1012/ST5000

Overview

Features

Technical data

Directions

High-grade silicone Gasket maker is designed to replace most tradition felt, cork and rubber gasket. Provides torque retention, leak control, flexibility, and resist oil, water, other fluids, its' reliable “formed-to-place” gasket that resist cracking, shrinking and migrating caused by thermal cycling.

Where to use

Specially used in manufacture & repair of auto & machinery.

It is ideally for intake and exhaust manifolds, headers, thermostat housings, etc.

Used on automobile/motorcycle’s engine valve, and such joint cover of rigid flange.

Used for valve covers, water pumps, oil pans, axel covers, thermostats, transmission pans, timing chain covers, intake manifolds (end seals), oil purmp flanges, etc.

Resistant to extreme temperature and petroleum relates products.

Highly flexible, non-corrosive and durable.

Excellent high temperature, low performance.

Fast curing, non-corrosive, good oil resistance.

Feature	Parameter
Density:	0.94-0.99
Extrusion (ml/min):	≥ 400
Surface setting Time (mm):	5-15
Shore Hardness:	20-30
Standard extend:	≥ 0.4
Bonding destroy area under standard condition(%):	≤ 5
Elastic recover rate(%):	≥ 85
Extend bond rate under standard condition:	100% no damage
Setting time(mm/24h):	3-8
Oil-Leakage rate:	≤ 2
applying temperature:	-40~ 150

Name

Download

MSDS

Safety Precautions

Wear gloves. Wash hands after use. For interior applications, use in a well ventilated area.

Preparation

Protect work area. Surfaces to be sealed or bonded must be clean and free from grease. For improved adhesion, roughen very smooth surfaces. Pre-fit all materials before applying product. Pierce tube with the point on the reverse end of cap.

Application

Tools Typically Required:
Tooling device.

As an adhesive:
Apply adhesive to both surfaces to be bonded. Wait for 5 minutes until adhesive is tacky and then press surfaces together. Clamp if necessary. Sets in approximately 10 minutes and dries in 24 hours. Dry time is dependent upon temperature, humidity and amount of adhesive used.

As a sealant:
Apply a layer thick bead over the area to be sealed. Tool if desired. Let dry for 24 hours. If necessary apply a second coat.

Effect

Have strong adhesive and sealing property for most material, after using, it become Highly flexible, non-corrosive and durable, and resist high temperature, oil resistance. Long life for bonding and sealing.